RIVER VALLEY SPEEDWAY HOME
SPECIAL EVENTS | RACING RESULTS | PROTEST RULES | MEET OUR DRIVERS | SPORTSMAN | HOBBY/THUNDER | SUPER STREET RULES | SUPER PONY RULES | ROAD HOGG RULES | SUPER HOGG/STREET STOCK RULES | DRIVERS POINTS | Our Guest Book | CONTACT INFO
LATE MODEL SPORTSMAN RULES
WHEELS AND TIRES:
1. Any 14" (max) wheels
2. 14" dirt tires (MD 56 or 55 Hoosiers)
3. No Carbon fiber wheels
BODY AND FRAME:
1. 104" (min) wheel base
2. Rubber nose gets 50 lb. weight break
3. Aluminum fabricated bodies must be approved by track.
(Southern-all-stars bodies OK)
4. Tube or Stock snout type frames
5. Set backs are measured from top ball joint to #1 plug-2" max. 8"spoilers
SUSPENSION
1. Must have 4 wheel brakes (racing disc. brakes OK)
2. Racing shocks (coil overs OK)
3. Weight - 2400 lbs.
ENGINES
1. Cast iron engine (362 cubic inches max)
2. Any flat tappet cam (no rollers)
3. After market rods ok (Steel only) 6 in. rods OK
4. After market crank OK
5. After market heads; Bowtie and Dart.
MAY NOT run aluminum heads.
6. No porting or polishing
7. Flat top pistons only (2or4 eyebrow) 1/2gasket match ok
8. Roller rockers (opt) No mushroom lifters
9. No mags or crank trigger permitted
10. Engine set back 72" from center of rear-end to front of
bell housing.
TRANSMISSION AND REAR END:
1. No direct drives (quick change OK) May run bert or Brinn
2. Must run blow-proof bell housing or scatter shield if
running stock transmission
FUEL SYSTEMS:
1. Any 1 carb intake (750 max carb)
2. Gas or Alcohol
3. Headers must run parallel to ground
4. No turn down headers
NO RADIOS OR MIRRORS ALLOWED.
HOME SPECIAL EVENTS | RACING RESULTS | PROTEST RULES | MEET OUR DRIVERS | SPORTSMAN | HOBBY/THUNDER | SUPER STREET RULES | SUPER PONY RULES | ROAD HOGG RULES | SUPER HOGG/STREET STOCK RULES | DRIVERS POINTS | Our Guest Book | CONTACT INFO